Draft 05 | Primary source: Kioxia America's official SSD Selector for Dell Technologies. Verification date: 2026-11-15. Note: the selector's main page and all five series subpages (CM7, CD8P, RM7, PM7, CD8) were fetched and verified in full; the pages carry no publication date, so the access date stands.

The Failure Mode Isn't Slow Drives — It's the Wrong Drives

Official Kioxia CD8P data center NVMe SSD product photo (2.5-inch)
Official Kioxia CD8P data center NVMe SSD product photo (2.5-inch)

When you spec drives for a PowerEdge, the most common disaster isn't insufficient performance — it's a mismatch: the wrong interface generation, a form factor the backplane doesn't take, an endurance class bought too low, a missing encryption option, or a retail drive's warranty presented against a whole-system service contract. Kioxia, one of Dell's SSD suppliers, publishes an official selector on its website. The logic is "pick the application first, then the series," backed by a master specification table covering four categories: Value SAS, Enterprise SAS, Enterprise NVMe, and Data Center NVMe. It isn't a price list — it's an officially endorsed workload-to-series mapping, and for an integrator that's far more reliable than a salesperson's verbal recommendation. This article takes the table apart layer by layer and flags the things it doesn't say but you must know before ordering.

Reading the Table by Workload: CM7, CD8P, Value SAS

Official Kioxia Dell partnership banner: Transform Your Data Center with Dell Technologies and KIOXIA SSDs
Official Kioxia Dell partnership banner: Transform Your Data Center with Dell Technologies and KIOXIA SSDs

First, the naming convention (my synthesis from the official pages): suffix R means read-intensive (1 DWPD), V means mixed-use (3 DWPD); prefix CM is enterprise NVMe (dual-port), CD is data center NVMe, PM is enterprise SAS, and RM is Value SAS. Every series carries a 5-year warranty, and all use BiCS FLASH 112-layer TLC.

The master table, condensed (all figures transcribed from the official pages):

CategorySeriesWorkloadEnduranceEncryption optionsCapacity (GB)Random read/write (IOPS)Sequential read/write (MB/s)
Value SASRM7-RRead-intensive1 DWPDSED960–7,680190K/40K1,100/1,050
Value SASRM7-VMixed-use3 DWPDSED1,920–3,840190K/55K1,100/1,050
Enterprise SASPM7-RRead-intensive1 DWPDISE/FIPS1,920–15,360720K/175K4,200/4,100
Enterprise SASPM7-VMixed-use3 DWPDISE/FIPS1,600–12,800720K/355K4,200/4,100
Enterprise NVMeCM7-RRead-intensive1 DWPDISE/FIPS1,920–30,7202.7M/310K14,000/7,000
Enterprise NVMeCM7-VMixed-use3 DWPDISE/FIPS1,600–12,8002.7M/600K14,000/7,000
Data Center NVMeCD8-RRead-intensive1 DWPDISE/SIE960–15,3601.25M/200K7,200/6,000
Data Center NVMeCD8-VMixed-use3 DWPDISE/SIE800–12,8001.25M/380K7,200/6,000
Data Center NVMeCD8P-RRead-intensive1 DWPDISE1,920–15,3602M/200K12,000/5,500
Data Center NVMeCD8P-VMixed-use3 DWPDISE1,600–12,8002M/400K12,000/5,500

The interface hierarchy comes from the subpages: RM7 is SAS-3 12Gb/s, officially positioned as a "SATA replacement," compatible with PERC RAID with no infrastructure changes; PM7 is SAS-4 22.5Gb/s (24G SAS), dual-port; CM7 is PCIe Gen5, NVMe 2.0, dual-port, in E3.S and 2.5-inch form factors; CD8P is Gen5, NVMe 2.0, E3.S; CD8 is Gen4, NVMe 1.4, 2.5-inch.

The application mapping, transcribed from the selector: machine learning → CM7/CD8P (sequential read double-checked plus sequential write — fast dataset loading and checkpoints); financial trading → CM7-V/CD8P-V (random writes); transactional databases → CM7 + CD8/CD8P + RM7/PM7; file and application serving → CD8-R/CD8P-R + RM7-R/PM7-R; medical imaging → RM7/PM7; BI/OLAP → CM7-R/CD8-R/CD8P-R; software-defined storage → CM7/CD8P (random reads and writes); big data and backup/DR → CD8/CD8P + RM7/PM7.

Two findings from close reading. First, medical imaging is the only scenario in the entire table that recommends SAS alone, with no NVMe option — a reflection of installed PACS environments running SAS backplanes and PERC controllers, and a reminder that this table is compatibility-oriented, not performance-optimal. Second, the master table caps PM7-R capacity at 15,360 GB, but the PM7 subpage already lists 30,720 GB models — the master table lags. Specs also vary sharply by capacity within a series: the CM7-R 30.72 TB version drops to 10,000 MB/s sequential read and 1.6M random-read IOPS. Don't apply a small-capacity model's ratings to a big one. For ordering, the Dell configurator and QVL are the authority.

How to Read DWPD and the Warranty

Official Kioxia CD8P series banner: Data Center PCIe 5.0 NVMe SSD (2.5-inch and E3.S)
Official Kioxia CD8P series banner: Data Center PCIe 5.0 NVMe SSD (2.5-inch and E3.S)

The official footnote defines DWPD as full-drive writes per day under a worst-case 4K random workload, sustainable for 5 years (the warranty period). Converted to total writes, it's more intuitive (calculated): 3.84 TB × 1 DWPD × 365 × 5 ≈ 7,008 TB (~7 PB); 12.8 TB × 3 DWPD × 365 × 5 ≈ 70,080 TB (~70 PB). At equal capacity, a V-series drive carries three times the write budget of an R-series drive — that's what the price difference buys.

The practical reading: measure your workload's average daily writes with monitoring first, then choose R or V. Buying one capacity tier up dilutes DWPD pressure (same daily writes, bigger drive, lower effective DWPD). DWPD is rated at worst-case 4K random, so sequential-write-heavy workloads enjoy more real-world margin. And "5-year warranty" is not "5-year lifespan" — writes beyond budget affect warranty rights.

One easily missed point: the absolute write budget behind a DWPD rating scales with capacity. Two V-series drives both rated 3 DWPD: the 1.6 TB version allows 4.8 TB per day, the 12.8 TB version 38.4 TB — an 8× difference (calculated). Always multiply capacity by DWPD and compare against your actual write volume; don't just stare at the multiplier.

And one footnote matters more than DWPD itself: warranty terms and service for Dell-branded SSDs are provided by Dell, not Kioxia. That means two warranty paths — buy a Dell OEM drive and the warranty follows the system contract; buy a Kioxia-branded drive and you go through Kioxia or the channel. Clarify the part-number system at quote time so warranty claims reach the right door.

Compatibility, QVL, and Firmware Baselines: What the Table Doesn't Say

The selector is series-level guidance, not a per-model QVL. Whether a specific PowerEdge can take Gen5 or E3.S depends on the model generation, the backplane, and the CPU's PCIe generation — check Dell's official configurator/QVL before ordering (editorial advice). E3.S and 2.5-inch are physically incompatible; inventory the chassis before choosing a form factor.

Firmware is the other hidden thread. Dell's support site publishes SSD firmware maintenance releases per model — the PowerEdge T560 driver page, for example, lists Dell Express Flash NVMe PS10x0 ISE, PM1733a/35a, P5520/P5620, and 7500/7600 entries — evidence that Dell-branded drives run a Dell-validated firmware baseline. Keep firmware uniform within a storage pool or RAID group and upgrade through iDRAC/Lifecycle Controller; mixed baselines turn troubleshooting into a nightmare (editorial advice). On the SAS side, the RM7/PM7 subpages explicitly confirm PERC RAID compatibility; on the NVMe side, CM7/CD8/CD8P are typically direct-attached, so plan backplane and cable topology ahead.

Encryption is not standard across the range: RM7 offers SED only (SAS uses TCG Enterprise), CD8P offers ISE only, and CM7/PM7 offer ISE/SIE plus FIPS 140-2 Level 2 validated versions; NVMe SED corresponds to TCG Opal/Ruby. A footnote also states that security-option versions are not available in every country due to export and local regulations — confirm FIPS-version availability for domestic procurement, and don't pay for compliance you don't need. Risk flags: non-QVL drives may trigger iDRAC alerts and support disputes (a common industry situation, from editorial experience); and random IOPS figures are high-queue-depth results (the selector's test-conditions table: CM7 random 4KiB at QD512, PM7/CD8/CD8P at QD256) — low-queue-depth, single-threaded applications will never see the rated numbers.

A Scenario Checklist for Guangzhou and PRD Enterprises

Localization advice: PRD customers run a lot of installed Dell chassis, so inventory backplane types first (SAS/SATA/NVMe, Gen4/Gen5) and only then match the table. Require Dell QVL evidence and a firmware version list from your supplier, and hold batch deployments to one baseline. For volume purchases, ask about lead times and alternative part numbers — firmware and QVL status don't necessarily move in sync across capacity points within a series. In the hot, humid climate, watch chassis airflow and drive temperatures via SMART, and put predictive maintenance ahead of failures.

Sources

  1. Kioxia America, *SSD Selector — KIOXIA SSDs for Dell Technologies Servers* — https://americas.kioxia.com/en-ca/business/ssd/oem/dell/ssd-selector.html — accessed 2026-11-15 (no publication date on the page).
  2. Kioxia, *CM7 Series Enterprise NVMe SSD for Dell* — https://americas.kioxia.com/en-ca/business/ssd/oem/dell/cm7-enterprise-nvme.html — accessed 2026-11-15.
  3. Kioxia, *CD8P Series Data Center NVMe SSD for Dell* — https://americas.kioxia.com/en-ca/business/ssd/oem/dell/cd8p-data-center-nvme.html — accessed 2026-11-15.
  4. Kioxia, *RM7 Series 12Gb/s Value SAS SSD for Dell* — https://americas.kioxia.com/en-ca/business/ssd/oem/dell/rm7-value-sas.html — accessed 2026-11-15.
  5. Kioxia, *PM7 Series 24G Enterprise SAS SSD for Dell* — https://americas.kioxia.com/en-ca/business/ssd/oem/dell/pm7-enterprise-sas.html — accessed 2026-11-15.
  6. Kioxia, *CD8 Series Data Center NVMe SSD for Dell* — https://americas.kioxia.com/en-ca/business/ssd/oem/dell/cd8-data-center-nvme.html — accessed 2026-11-15.
  7. Dell, *PowerEdge T560 Drivers and Downloads* (storage firmware entry example) — https://www.dell.com/support/product-details/zh-cn/product/poweredge-t560/drivers — accessed 2026-11-15.